Every thing you need for the offroad builds.
plans big and small (up to full race vehicles)
Every land rover defender owner is familiar with the “spare tire conflict” Putting the spare wheel on the front hood has most definitely a Hugh contribution for the defender sex appeal and appearance but can be a little problematic in technical terrain that requires maximum visibility. Putting the spare on the roof rack (assuming that Read More
A client of mine crashed his Dodge Ram into another car and smashed the original plastic bumper beyond repair. Now he was looking to replace the plastic bumper with something that can survive the next crash and leave all the damage to the other car… So a better front bumper was required, but because the Read More
0
Here is a work we did on a client’s car. If anyboday interested in more details, comment here.
0
Here are two Reinforced suspension arms I built for 2 buggys today. These arms replace the original stock old VW Transporter arms. Anybody interested? Send me your comments.
0
Fabrication files & drawings available here.
0
a special offroad buggy built for speed and rough terrain this buggy was created on solidworks first than moved to the metal fab i will upload the plans for it as soon as i finishe orgenize every thing the photos are curtesy of: Adi Capara, Nati Levi, Zeev Stein, Yoni Photos, and the JEEPOLOG.COM team Read More
0
This folded BBQ grill is flat and doesn’t take any space in your trunk, and can be assembled and ready to use in no time! it’s very easily assembled, and a great product! Fabrication files & drawings available here.
0
The ultimate bumper for your JK! * highlift ™ ready * LED lights housings * Winch ready Fabrication files & drawings available here.
0
This heavy duty spare wheel carrier provides easy access to the trunk door, and takes the heavy load off the door, keeping your rear window safe!
2
This heavy duty light weight Roof rack was built for a client of mine with a focus on durability and lowering the center of gravity as much as possible. Fabrication files and drawings will be available soon!
0
Here is my workshop ride, wearing a winch ready heavy duty front bumper. You can read about the build story here: http://fabricator.cc/dodge-ram-heavy-duty-front-bumper-2/ And download FREE Fabrication files and drawings available here.
0
A JEEP CJ/YJ Front bumper I built for a customer. You can get the Fabrication files & drawings here
0
After giving up most of the swing away latchs you find off the shelf, Here is my DIY latch, which proves to be much safer and robust.
0
Here is a wood stove I build last winter. All inner parts can be replaced easily.
0
This is a rack I built for a friend who was looking for something more solid than the 2mm aluminum aftermarket racks sold outside… This rack was built from 4mm aluminum, and in the next version we might even go for 6mm for extra tolerance.
0
These brackets are easy to build, require very simple welding and when installed with a 50 inch LED light bar gives great light!
0
A Dodge RAM Front bumper build – replacement for the stock plastic bumper.
2
0